应用S-T模型对沉积物中PAHs的生态风险分级评价

本文构建S-T模型,运用集对分析理论（set pair analysis）构建基本模型,采用层次分析法并参考毒性当量因子确定各指标权重,应用三角模糊数（triangular fuzzy number）对差异度系数进行改进,基于加拿大沉积物环境质量标准,对沉积物中多环芳烃进行生态风险分级评价.结果表明,该模型考虑到化合物之间的相互作用因素并做模糊处理,对差异度系数进行改进体现沉积物中多环芳烃生态风险等级标准的模糊性,为持久性有机污染物生态风险分级评价提供了一种简便客观有效的方法.     

Nanoencapsulation of hexavalent chromium with nanoscale zero-valent iron: High resolution chemical mapping of the passivation layer

Solid phase reactions of Cr(Ⅵ) with Fe(0) were investigated with spherical-aberration-corrected scanning transmission electron microscopy(Cs-STEM) integrated with X-ray energy-dispersive spectroscopy(XEDS). Near-atomic resolution elemental mappings of Cr(Ⅵ)–Fe(0) reactions were acquired. Experimental results show that rate and extent of Cr(Ⅵ) encapsulation are strongly dependent on the initial concentration of Cr(Ⅵ) in solution. Low Cr loading in nZⅥ(1.0 wt%) promotes the electrochemical oxidation and continuous corrosion of n ZⅥ while high Cr loading(1.0 wt%) can quickly shut down the Cr uptake. With the progress of iron oxidation and dissolution, elements of Cr and O counter-diffuse into the nanoparticles and accumulate in the core region at low levels of Cr(Ⅵ)(e.g., 10 mg/L). Whereas the reacted n ZⅥ is quickly coated with a newly-formed layer of 2–4 nm in the presence of concentrated Cr(Ⅵ)(e.g., 100 mg/L). The passivation structure is stable over a wide range of pH unless pH is low enough to dissolve the passivation layer. X-ray photoelectron spectroscopy(XPS) depth profiling reconfirms that the composition of the newly-formed surface layer consists of Fe(Ⅲ)–Cr(Ⅲ)(oxy)hydroxides with Cr(Ⅵ) adsorbed on the outside surface. The insoluble and insulating Fe(Ⅲ)–Cr(Ⅲ)(oxy)hydroxide layer can completely cover the n ZⅥ surface above the critical Cr loading and shield the electron transfer. Thus, the fast passivation of nZⅥ in high Cr(Ⅵ) solution is detrimental to the performance of nZⅥ for Cr(Ⅵ) treatment and remediation.     

可靠性强化试验技术在某型伺服作动器研制中的适用性探索

目的探索可靠性强化试验技术在典型机电液一体化产品伺服作动器研制过程中的适用性。方法以某型伺服作动器为研究对象,从故障激发的角度对可靠性强化试验技术的应用进行可行性分析,在响应调查和应力分析的基础上,结合产品的工作特点设计适用于该类伺服作动器的可靠性强化试验方案,包含低温步进应力试验、高温步进应力试验、快速温度循环试验10个循环、振动步进应力试验(包含气锤式三轴向六自由度超高斯随机振动方式及电磁振动台随机振动方式)及综合环境应力试验5个循环,并依此进行试验。结果在快速温度循环试验及综合环境应力试验过程中,均有效地激发出了产品的漏油故障,与相似产品外场暴露的漏油故障模式相吻合。结论可靠性强化试验技术可有效地应用于典型机电液一体化产品伺服作动器的研制过程,设计的可靠性强化试验方案可有效地激发外场出现频率较高的故障,可作为该类产品研制的试验手段之一。     

“天舟一号”货运飞船在轨污染探测数据分析

目的分析"天舟一号"(TZ-1)货运飞船的空间污染探测器的在轨探测数据。方法 TZ-1货运飞船上的污染探测器采用石英晶体微量天平(QCM),利用污染物沉积在QCM探测器传感晶片表面引起的振荡频率变化情况来分析航天器在轨空间污染环境。根据其探测原理,通过分析下传的原始数据,得到航天器在轨的污染累积量结果。结果航天器在轨飞行过程中,污染累积已达到会导致污染敏感器件光学性能明显退化的程度,并且污染源温度是影响航天器污染累积量的一个重要因素,可以将其作为航天器在轨污染控制的重要措施。结论该研究结果可以为航天器污染设计、控制提供参考,为提高航天器可靠性设计提供数据支持。     

东海表层沉积物中多环芳烃的分布特征及来源解析

本研究对东海沉积物中多环芳烃(PAHs)组成及含量进行了分析,发现多环芳烃总浓度为8.2~180.2 ng/g,和国内外其它区域相比,整体处于一个低至中等程度的污染水平。东海沉积物中PAHs的分布整体表现为中间低、两端高的格局。内陆架是长江入海物质的主要沉积区,也是PAHs的主要汇集区;陆架北部区域的物质来源复杂,但总体受长江入海泥沙的控制,自西向东PAHs含量梯度递减;研究区域的东北部,较高的PAHs可能源于济州岛的输入;冲绳海槽也含有较高PAHs;而残留沉积区中PAHs含量极低。通过多环芳烃组成特征判断,东海表层沉积物中PAHs主要来自煤、木材、油类的燃烧,还有部分来自油类的泄漏。同时不同区域Ba P/Be P、Ba A/Chry比值的差别表明内陆架及冲绳海槽的PAHs主要来自河流输送,残留沉积区的PAHs可能主要来自大气沉降。     

西安市文教区表层土壤中PAHs来源及风险分析

文教区土壤环境质量直接影响学生以及职工的身体健康。本研究应用高效液相色谱仪对采集的西安市文教区表层土壤样品中的16种优控多环芳烃(PAHs)进行含量检测,分析其组分特征、来源及健康风险。结果表明,西安市文教区表层土壤中∑PAHs含量为0.290~4.147μg/g,平均值为1.515μg/g,7种致癌多环芳烃的含量为0.079~2.093μg/g,均值为0.593μg/g,土壤PAHs污染较为严重。其中4环的高环PAHs为土壤PAHs污染的主要物质,平均占∑PAHs含量的40.72%。源解析结果表明西安市文教区表层土壤中PAHs主要来源于石油燃烧、煤及生物质等的不完全燃烧。终生癌症风险评价表明西安市文教区表层土壤中PAHs污染对其生活在周围的人群产生的终生致癌风险性较小,但71.4%的样点达到严重污染水平,产生的间接影响应引起足够重视。     

固相微萃取-毛细管气相色谱法快速同步分析水中有机氯及有机磷农药

固相微萃取是一种快速、简便,集萃取浓缩进样于一体的样品前处理技术,具有分析时间短、灵敏度高、无需有机溶剂的优点.用固相微萃取富集水中8种有机氯及7种有机磷农药,毛细管气相色谱ECD检测器分离分析,整个分析过程只需26min,检出限可达0.002～1μg/L,已用于地表水中有机氯及有机磷农药含量的测定.     

原煤二氯甲烷浸取液中多环芳烃分布特征

本文用色谱／质谱／红外联用系统研究了原煤二氯甲烷浸取液中多环芳烃的种类、数量、含量及其分布特征。为进一步研究煤燃烧排放飞灰、烟气、炉渣中多环芳烃分布打下良好基础。     

Desert Water Harvesting to Benefit Wildlife: A Simple, Cheap, And Durable Sub-Surface Water Harvester for Remote Locations

A sub-surface desert water harvester was constructed in the sagebrush steppe habitat of south-central Idaho, U.S.A. The desert water harvester utilizes a buried micro-catchment and three buried storage tanks to augment water for wildlife during the dry season. In this region, mean annual precipitation (MAP) ranges between about 150–250 mm (6″–10″), 70% of which falls during the cold season, November to May. Mid-summer through early autumn, June through October, is the dry portion of the year. During this period, the sub-surface water harvester provides supplemental water for wildlife for 30–90 days, depending upon the precipitation that year. The desert water harvester is constructed with commonly available, “over the counter” materials. The micro-catchment is made of a square-shaped, 20 mL. “PERMALON” polyethylene pond liner (approximately 22.9 m × 22.9 m = 523 m²) buried at a depth of about 60 cm. A PVC pipe connects the harvester with two storage tanks and a drinking trough. The total capacity of the water harvester is about 4777 L (1262 U.S. gallons) which includes three underground storage tanks, a trough and pipes. The drinking trough is refined with an access ramp for birds and small animals. The technology is simple, cheap, and durable and can be adapted to other uses, e.g. drip irrigation, short-term water for small livestock, poultry farming etc. The desert water harvester can be used to concentrate and collect water from precipitation and run-off in semi-arid and arid regions. Water harvested in such a relatively small area will not impact the ground water table but it should help to grow small areas of crops or vegetables to aid villagers in self-sufficiency.     

CTL-12型化学需氧量速测仪与标准法测定CODCr之比较

使用CTL—12型化学需氧量速测仪分析废水化学需氧量，简便、快速，且方法可行，完全能满足环境监测技术要求。